The SWAFAN GT12 has three types of fan blades, the pre-installed high static pressure fan blade, the high airflow fan blade, and the reverse high airflow fan blade. With all the options in your hands, you can swap your fan blades to accommodate different PC-building scenarios.

The CTE C750 TG ARGB is a specially designed E-ATX full tower chassis from the new CTE form factor series, and is designed to provide high levels of thermal performance to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators at the front, motherboard side and rear of the chassis.

The CTE C750 TG ARGB Snow is a specially designed E-ATX full tower chassis from the new CTE form factor series, and is designed to provide high levels of thermal performance to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators at the front, motherboard side and rear of the chassis.

The CTE C750 Air is a specially designed E-ATX full tower chassis from the new CTE form factor series that emphasizes maximum airflow and is designed to provide high levels of thermal performance to critical components. It comes with three pre-installed 140mm CT140 fans and can support up to 420mm AIO radiators at the front, motherboard side and rear of the chassis.

The CTE C750 Air Snow is a specially designed E-ATX full tower chassis from the new CTE form factor series that emphasizes maximum airflow and is designed to provide high levels of thermal performance to critical components. It comes with three pre-installed 140mm CT140 fans and can support up to 420mm AIO radiators at the front, motherboard side and rear of the chassis.

TOUGHAIR 710 is constructed with a Dual-Tower Dual Fan Design for the latest Intel and AMD CPUs, allowing the two 140mm fans to perform the best possible cooling and kicking the TOUGHAIR series up a notch for the latest CPUs.

Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 1200W can deliver up to 600W for PCIe 5.0 graphics cards.

Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 1050W can deliver up to 600W for PCIe 5.0 graphics cards.

Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 850W can deliver up to 450W for PCIe 5.0 graphics cards.

SWAFAN EX incorporates a new magnetic force design for quick connection among fans with its 12 V cable and at the same time keeping the swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.

Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline)The native 16 PIN (12VHPWR) PCIe connector of the GF A3 750W can deliver up to 300W for PCIe 5.0 graphics cards.

Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.

The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 650W can deliver up to 300W for PCIe 5.0 graphics cards.

Pacific TF3 Liquid Cooling System Dashboard has 3 analog dashboards that allow you to check your system’s real-time Coolant Temperature, Coolant Pressure, and even Chassis’ Ambient Temperature. It can be installed anywhere inside the chassis because of its 120 mm fan shape design.

SWAFAN EX incorporates a new magnetic force design for quick connection among fans with its 12V cable and at the same time keeping the swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.

SWAFAN EX incorporates a new magnetic force design for quick connection among fans with its 12 V cable and at the same time keeping the swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.