Core P3 TG Pro Snow Core P3 TG Pro Snow Core P3 TG Pro Snow Core P3 TG Pro Snow Core P3 TG Pro Snow Core P3 TG Pro Snow
Core P3 TG Pro Snow

Core P3 TG Pro Snow

In stock
P/N
CA-1G4-00M6WN-09
USD$159,99
The new open frame chassis of the iconic Core P series, the Core P3 TG Pro Snow, is an upgraded version of our beloved Core P3 TG. The chassis includes an additional fan bracket, modernized I/O ports, redesigned base and an improvement on the M/B side layout which provides plenty of possibilities for advanced hardware.

Thermaltake

Core P3 TG Pro Snow

Build Like A Pro.

Watch more
Core P3 TG Pro Snow
The new open frame chassis of the iconic Core P series, the Core P3 TG Pro Snow, is an upgraded version of our beloved Core P3 TG. The chassis includes an additional fan bracket, modernized I/O ports and an improvement on the M/B side layout which provides plenty of possibilities for advanced hardware. The additional fan bracket can be placed at the front or on the top, and three 120mm/140mm fans, a 360mm/420mm radiator, or a distro plate can be fitted. What’s more, the redesigned recessed compartment on the motherboard's right side makes it more convenient to install GPUs and allows more opportunities for installing a high-end graphics card. The Core P3 TG Pro Snow features a fully modular design, rotational PCI-E Slots, an extra GPU holder, support for 120mm and 140mm fans, support for 360mm and 420mm radiators, modernized I/O ports and redesigned base for stability. No matter if you are AIO or DIY enthusiast, you will find a place to put your cooling components easily; Core P3 TG Pro Snow is for all PC enthusiasts to “Build Like A Pro”!
 
  • The image is for reference only.
  •  
Convenience First

The redesigned recessed compartment on the motherboard's right side makes it more convenient to install GPUs and allows more installation opportunities for high-end graphics cards such as 40 series. Users are able to place high-end graphics cards and enjoy advanced cooling components at the same time.

 
An Additional Fan Bracket For the Utmost Expansion

The Additional Fan Bracket can be placed at the front or on the top of the chassis. Users may choose to install three 120mm/140mm fans, a 360mm/420mm radiator or a distro plate with the Additional Fan Bracket. No matter if you are AIO or DIY enthusiast, you will find a place to install your cooling components easily.

 
Three-Way Placement Layout

The Core P3 TG Pro Snow is designed for use in three different orientations: wall-mounted, vertical, and horizontally placed. Built for customization that reflects the makers’ personality, the Core P3 TG Pro Snow allows easy adjustments to the chassis for the best viewing presentation while ensuring outstanding cooling performance.

 
4mm Thick Tempered Glass Window with Stunning Views

Core P3 TG Pro Snow is an open frame case with exceptional viewing capabilities. The 4mm thick side tempered glass panel guarantees the durability of the window and allows you to build with crisp clarity. Users can fully display every component of the system and show off their artistry and skill sets.

 
Display It Your Way

Rotational PCI-E slots give you the option to display your graphics cards either horizontally or vertically, creating plenty of flexible space for your system. Moreover, an attached GPU holder gives extra support to graphics cards, users won’t need to worry about the sag caused by heavy graphics cards.

 
Enhances Stability with the Redesigned Base

The Core P3 TG Pro Snow features a redesigned base to ensure stability and without compromising the aesthesis of the chassis.

 
 
     
How much storage is totally up to you

For the storage compatibility , the Core P3 TG Pro Snow gives maximum support of up to 3.5” HDD x 4 or 2.5” SSD x 5.

Chassis Front
Chassis Back
 
  • The image is for reference only.
  •  
Expansion and Liquid-Cooling Solution
The Core P3 TG Pro Snow has excellent expandability, allowing you to build the most high-end system you can dream of. It can support up to an E-ATX (12”x10.5”) motherboard, a CPU cooler with a maximum height of 180mm, two-way GPU placements of up to 450mm in length (without reservoir), a power supply with a length of up to 200mm, and up to five 2.5” SSD or four 3.5” HDD. Users may also choose to install three 120mm/140mm fans, a 360mm/420mm radiator or a distro plate on the additional fan bracket or on the redesigned recessed compartment on the motherboard’s right side. When it comes to cooling solutions, the Core P3 TG Pro Snow is optimized for air cooling and advanced AIO/DIY liquid cooling components as well. With remarkable hardware compatibility, no matter if you are an AIO or DIY lover, you will find a place to put your cooling components easily, giving you a chance to make your dream pc build come true.
  • 120mm
  • 140mm
  • 120mm
  • 140mm
  • 120mm
  • 140mm
  • 240mm
  • 280mm
  • 360mm
  • 420mm
  • 120mm
  • 140mm
  • 240mm
  • 280mm
  • 360mm
  • 420mm
 
DMD – Dismantlable Modular Design

The Core P3 TG Pro Snow enables users to freely build the system from the ground up with the given modular panels, racks, brackets, and pre-designed mounting arrays. No more unreachable screw corners or gaps and enjoy installation with a breeze with our Dismantlable Modular Design.

 
Built for Makers
By practicing and incorporating the idea of the “maker movement” as well as 3D printing, Thermaltake designed an open framed panoramic viewing chassis so that anyone can access and create his/her own mods as well as print out his/her own ideas by using available liquid cooling components and manuals without limitations.
Users can download 3D printing accessory files on the 3D Makers Microsite. Print them out to create a special mod.
 
 
 
 
More Information
P/N CA-1G4-00M6WN-09
Series Core
Case Type Mid Tower
Dimension (H x W x D) 535 x 268 x 500 mm
(21.06 x 10.55 x 19.69 inch)
Net Weight 12.5 kg / 27.6 lbs.
Side Panel 4mm Tempered Glass x 1
Color White
Material SPCC
Expansion Slots 8
Motherboards 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX),
12” x 9.6” (ATX), 12” x 10.5” (E-ATX)
I/O Port USB 3.2 (Gen 2) Type-C x 1, USB 3.0 x 2, HD Audio x 1
PSU Standard PS2 PSU (optional)
Fan Support Right (M/B Side):
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
Bracket (front or top):
3 x 120mm, 2 x 120mm, 1 x 120mm
3 x 140mm, 2 x 140mm, 1 x 140mm
Radiator Support Right (M/B Side):
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Bracket (front or top):
1 x 360mm, 1 x 240mm, 1 x 120mm
1 x 420mm, 1 x 280mm, 1 x 140mm
Clearance CPU cooler height limitation: 
180mm
VGA length limitation:
330mm(With reservoir)
450mm(Without reservoir)
PSU length limitation:
200mm

User Manual

  • File Name
  • Description
  • Size
  • Version
  • Release Date